Seal Strength & Peel Testing

Seal Strength & Peel Testing

TestCert Lab provides seal strength and peel testing for medical, pharmaceutical and food packaging in Pakistan. A strip cut across the seal is pulled apart on a peel tester to measure the force needed to open it, showing whether the seal is strong enough to protect the product and still open cleanly when used.

Why seal testing matters

For sterile medical devices, a weak or leaking seal means the product is no longer sterile. For food and pharmaceuticals it can mean contamination or spoilage. Seal strength results are needed to validate sealing machines, to monitor production, and to show buyers and regulators that sterile barrier packaging performs as intended.

Standards commonly requested

  • ASTM F88: seal strength of flexible barrier materials
  • ASTM F1929: dye penetration to detect seal leaks
  • ISO 11607: packaging for terminally sterilized medical devices

Products we test

  • Sterile pouches and header bags for surgical instruments
  • Blister packs and lidded trays
  • Food and pharmaceutical sachets and laminates

Samples and turnaround

Send sealed packs from normal production, usually several per sealing setting or batch. Results are typically ready within a few working days.

What your report includes

The report gives the peel force for each sample, the average and range, the failure mode observed, and a pass or fail result against your specification.

Related tests

Request a quote for seal strength & peel testing

Tell us about your product and the standard you need, and we will confirm samples, cost and timeline.

Request a Quote

Or call +92 321 8617100 · email info@testcert.org

Seal Strength & Peel Testing FAQs

What is a good seal strength value?

It depends on the material and use. Your specification or the material supplier usually defines the range; we report results against it.

Can you also check for leaks?

Yes. Dye penetration testing can detect channels and leaks in seals that a strength test may miss.

Do you test sterile medical pouches?

Yes. Seal strength and integrity testing are part of validating sterile barrier systems under ISO 11607.

How many samples should I send?

Usually several packs per batch or machine setting. We will confirm the number for your validation or routine check.