Fabric Shrinkage Testing
TestCert Lab carries out fabric shrinkage testing for textile mills, garment makers and exporters in Pakistan. Marked samples are washed and dried under standard conditions and re-measured, to show how much the fabric or garment shrinks or stretches in length and width after home laundering.
Why buyers ask for shrinkage results
Garments that shrink after washing lead to complaints and returns. International brands set maximum dimensional change limits, often around 3 to 5 percent, in their quality manuals, so exporters need shrinkage results for fabrics and finished garments before bulk production and shipment.
Standards commonly requested
- ISO 5077: determination of dimensional change in washing and drying
- ISO 6330: domestic washing and drying procedures
- AATCC 135 (fabrics) and AATCC 150 (garments)
Materials we test
- Woven and knitted fabrics, including denim and cotton blends
- Finished garments and home textiles
Samples and turnaround
A fabric piece of about half a metre, or a finished garment, is usually enough. Results are typically ready within a few working days, depending on the number of wash cycles required.
What your report includes
The report gives the percentage change in length and width, the wash and dry conditions used, and a comparison with your buyer’s limits.
Related tests
Request a quote for fabric shrinkage testing
Tell us about your product and the standard you need, and we will confirm samples, cost and timeline.
Or call +92 321 8617100 · email info@testcert.org
- Colorfastness to Rubbing (Crocking) Test
- Tear Strength Testing – Resistance to Tearing in Textiles and Leather
- Tensile Strength Testing – Breaking Force & Elongation Analysis
- Flexural Endurance Testing – Resistance to Repeated Bending
- Flammability Testing – Flame Resistance & Burning Behavior
- pH Value Testing of Leather – Acidity and Alkalinity Assessment
- Hydrostatic Pressure Testing – Waterproofness Evaluation
- Water Resistance Testing – Assessing Water Absorption and Repellency
- Flex Crack Resistance Testing (Leather)
Fabric Shrinkage Testing FAQs
How much shrinkage is acceptable?
Many buyers allow about 3 to 5 percent, but limits vary. Share your buyer's specification and we report against it.
Do you test garments or only fabric?
Both. Fabric is tested to ISO 5077 or AATCC 135, and garments to AATCC 150 or the buyer's method.
How many wash cycles do you use?
Usually one or three, as specified by the standard or buyer.
Can you test other fabric properties?
Yes. We also test colorfastness, tear and tensile strength and other textile properties.